Perfect for servers, motor driven and sensitive devices requiring a perfect sine wave to operate correctly. LCD provides real time battery management, showing battery and load level. All outlets are battery backup and surge protected. Includes software which communicates via USB or RS-232. All provide phone line surge protection (RJ45). Typical backup: 5 min full load, 14 min half load.
Line Interactive UPS: Regulates the power as it falls and surges. They offer protection against surges, sags, brownouts, spikes, radio and electrical interferences. If the spike or sag is severe (over 24V above or below nominal 240V output), the UPS will transfer the load to the batteries. The reason why it is called a Line Interactive UPS is because it only interacts when there are fluctuations in the power line.
Visit the PowerShield UPS Sizing Guide. which will help you select the correct UPS for your power protection needs.
Features
- True Online Double Conversion
- Wide input voltage range (110-300 VAC)
- Input power factor correction 0.98
- 50Hz/60Hz frequency converter mode
- Programmable power outlets
- Emergency power off function (EPO)
- Eco-mode operation for energy saving (ECO)
- Generator compatible
- Backup time for all models is easily extended by simply plugging additional battery banks
- Charger capacity expansion to 8A for long-run models
- USB+RS232 + SNMP + AS400 multiple communications
- Maintenance Bypass Switch available
Specifications
- Capacity: 2000VA/1800W
- Voltage range:
- -Low line transfer: 160VAC/140VAC/120VAC/110VAC ± 5 %,
- ( based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
- – Low line comeback: 170/150/130/120VAC ±5%
- – High line transfer: 300VAC ±5%
- – High line comeback: 290VAC ±5%
- Frequency Range: 40-70Hz
- Phase: Single phase with ground
- Power factor: ≥0.99@100% nominal load
- Voltage (selectable): 240VAC (Selectable 208, 220, 230, 240VAC)
- AC Voltage regulation (Battery mode): ±1%
- Frequency range (Battery mode): 50Hz or 60Hz ±1%
- Current Crest Ratio: 5:1
- Transfer time: 4ms
- ECO Mode: 98%
- Battery mode: 87%
- Battery type: 12V 9Ah
- Quantity: 6pcs
- Typical recharge time: 4 hours recover to 90% capacity
- Charging current (max): 1.5A
- LCD Panel: UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
- Battery mode: Sounding every 4 seconds
- Low battery: Sounding every second
- Overload: Sounding twice every second
- Fault: Continuously sounding
- Dimensions: 600D x 438W x 88H 2RU mm
- UPS Net weight: 29.6kg
- Operational humidity: 20-90 % RH @ 0- 40°C (non-condensing)
- Noise: Less than 50dBA @ 1 Meter
- Smart RS232, USB: PowerShield NetGuard Software - Supports Windows Based Operating Systems, Linux & Unix