Power Supply 30W 5V/6A Mini Screw Terminal M8418

The Mean Well IRM-30-5ST 30W miniature AC-DC power supply features screw terminals for simple connection to electronic instruments or industrial automation equipment. It has a universal input range from 85-305V AC and output at 5VDC (at 6A max current). The 94V-0 flame retardant plastic case and fully potted silicone enhance the heat dissipation.

Meets anti-vibration demand up to 5G and provides resistance to dust and moisture. With the high efficiency up to 90% and the extremely low no-load power consumption below 0.1W, IRM-30 series fulfils the worldwide regulation for the low power consumption requirement of electronics. The entire series is a Class II design (no FG pin), incorporating the built-in EMI filtering components and enabling compliance with BS EN/EN55032 Class B; the supreme EMC features keep the end electronics units from electromagnetic interference. 

Features

• Small, compact size with simple screw terminal connection
• Wide operating temperature range
• EMI Class B without additional components
• Short circuit, overload & over voltage protections
• Cooling by free air convection

• DC Voltage: 5V
• Rated Current: 6A
• Current Range: 0~6A
• Rated Power: 30W
• Ripple & Noise (max): 120mVp-p
• Voltage Tolerance: ±2.5%
• Line Regulation: ±0.5%
• Load Regulation: ±1.0%
• Setup/Rise Time: 1000ms, 30ms/230V AC, 1500ms, 30ms/115V AC at full load
• Hold Up Time (typ): 40ms/230V AC, 12ms/115V AC

• Voltage Range: 85 ~ 305 V AC
• Frequency Response: 47~440Hz
• Efficiency (typ): 83%AC Current (typ): 0.75A/115V AC, 0.5A/230V AC, 0.375A/277V AC
• Inrush Current (typ): Cold Start 25A/115V AC, 45A/230V AC
• Leakage Current: <0.25mA/277V AC

• Overload: 105% ~ 160% rated output power
• Overload Protection Type: Hiccup Mode, recovers automatically after fault condition is removed
• Over Voltage: 5.25 ~ 6.75V
• Over Voltage Protection Type: Shut off op voltage, clamping by zener diode.

• Working Temperature: -30°C ~ +70°C
• Working Humidity: 20 ~ 90% RH non-condensing
• Storage Temperature/Humidity: -40 ~ +85°C, 10 ~ 95% RH
• Temperature Coefficient: ±0.03%/°C (0 ~ 50°C)
• Vibration: 10 ~ 500Hz, 5G 10min/1 cycle, period of 60 mins. Each along X, Y, Z axis
• Lead Temperature: 260±5°C, 5s (max)
• Over Voltage Category: III, according to EN62368-1, altitude up to 2000 meters
• Operating Altitude: 2000 meters