Battery Lithium Slimline LiFePO4 12.8V 135Ah S SL4580W

SKU: 9321758175965

Price:
$1,299

These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 75mm high and weigh just 25kg. Each is fitted with 120A Anderson input and output plugs for easy connection to your equipment or solar charger output. Each utilises the same battery management system found in the standard LiFePO4 battery series for safe operation at all times, plus a handy voltage & capacity readout.

About LiFePO4.
The latest generation in maintenance free batteries is here! LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. LiFePO4 also provide more usable life per cycle, allowing for longer run times by holding a higher voltage until capacity is almost exhausted. These batteries will also maintain 80-90% charge when in storage - far higher than their lead acid counterparts.

Each battery is fitted with an internal battery management system to provide safe charging and discharging at all times. This system provides internal short circuit, over temperature and under/over voltage cut off.

Factory supplied 30% charge for safety compliance. Must be charged fully before use.

Note: Does not mate with Grey Anderson SB120 connector - SUITS BLUE ANDERSON ONLY, see accessories below (this plug has a slightly different keyway).

Features

  • 5 year warranty.
  • Slimline casing just 75mm high! 
  • High discharge rate design allows current draw up to 100A.
  • Battery capacity and voltage readout.
  • 120A Anderson style connection for easy integration with solar & appliance cabling.
  • Stable LiFePO4 chemistry suitable for in vehicle use as auxiliary batteries.
  • Internal battery management system for safe charging and discharging.

General
  • Dimensions: 600L x 370W x 75Hmm
  • Overall Weight: 220kg
  • Terminal Type: NM
  • Connection: 12V-48V max 4 in series, no limit in parallel.
  • Note: When used in series each battery will need to be discharged to cut off before connecting so that all cells are all balanced.
  • Case Material: Metal
  • Case IP Rating: IP50
  • Certification: CB/CE
  • Shipping Class: UN3480, Class 9
Battery Module
  • Nominal Voltage: 12.8V
  • Capacity: 135Ah
  • Charging Voltage: 14.8V max, (Recommended 14.2V)
  • Discharging Voltage: 9.6V max, (Recommended 11.8V)
  • Charging Current: 100A max, Recommended 25A
  • Max Constant Discharge: 100A
Datasheet
User Manual
AS/NZS 3001.2 Installation Guide

You may also like

Recently viewed