Designed to be used in conjunction with Redback Touch programmable touchscreen wallplates, this control hub enables the control of a variety of devices. Connection to the wallplate is via Cat5/6 cable up to 50m away. All commands from the programmed plate are then transported to this hub and the appropriate command signal being either serial (RS232/485 or both), IR or relay is then output to the corresponding pluggable terminals.
Combined with the wallplate this could be used for controlling an AV system in a classroom, lecture theatre, board room etc. The serial outputs could be used to control a projector and amplifier, the IR for controlling a set top box and relays for motorised projector screen, lighting etc. A passive infra red (PIR) detector input allows for motion activation of devices, such as when people enter the room. Requires 24V DC power which in turn powers the wallplate.
Size: 66W x 131W x 29H inc flanges.
Features
- Compatible with Redback Touch control wallplates or third party serial control systems.
- Two RS232/485 inputs.
- Three relay outputs.
- PIR motion detect sensor trigger input.
- Infra-red control input.
- Wallplate connection via standard UTP cabling.
- Powered by 24V DC input (passes power to wallplate – power supply sold separately)
- Australian Designed & Manufactured.
Specifications
Input Connectors
- Power connection (24V DC): 2.1mm DC socket, Euroblock terminal
- Data: RJ45 8P8C
Output Connectors
- Relay (1-3) Switched Out: Screw Terminals
- NOTE: Relays rated for low power, typical 24V DC switching
- IR Out: Screw Terminals
- Serial Out (RS232 & RS485): Screw Terminals
Mechanical
- Dimensions: 90W x 131D x 30H
- Current Draw: 50mA (idle) 150mA (Max)
- Weight:0.18kg