A 5W dash mount 80 channel transceiver equipped with a host of modern features and a range of up to 10km. Includes a complete set of accessories: handheld mic, cradle, antenna and mounting bracket. This amazingly compact design is only 76W x 100D x 22Hmm.
Pack Includes
1x Premium UHF CB Radio (DTX4300)
1x Heavy Duty Microphone (MIC110)
1x Microphone mounting bracket
1x Transceiver mounting bracket
1x 6.5dBi Antenna (ANU220)
1x Antenna Mounting Bracket (BR100)
1x Pack of supplied mounting screws
1x User Guide
Features
- 5W RF power
- 80 channels
- Flip LCD function
- Automatic level control (ALC)
- Heavy-duty microphone with volume control
- CTCSS & DCS
- 7 colour backlit display
- Duplex (range extender)
- Open/group scan
- Priority channel
- Rotary channel select
- Digital squelch control
- Busy channel lockout
Specifications
General
Transmitter
Receiver
Mechanical
- Compliance: AS/NZS 4365:2011
- Frequency Range TX/RX: 476.425 - 477.4125 MHz
- Number of TX/RX Channels: 80 UHF CB Channels (75 voice)
- Channel Spacing TX/RX: 12.5KHz
- Operating modes: Simplex, Repeater TX offset (+750KHz)
- Scanning Speed: 50 msec per channel
- Antenna Impedance: 50 Ohms
- Operating Volts nominal: 13.8V DC
- Operating Volts Range: 10 to 16 VDC
- Over Voltage Protection: Diode and Voltage regulator system
- Over Current Protection: 2 AMP fuse
- Reverse Polarity Protection: Shunt diode
- Frequency stability: +/- 5 ppm
Transmitter
- RF Output Power: 5 watts max
- Modulation: F3E(FM)
- Maximum deviation: 2.5KHz
- Spurious Emissions: <-30dBm
- TX Audio pre-emphasis: +6dB/Octave from 300Hz to 3KHz
- Current consumption during TX: 1.7 AMP with 50 ohm antenna termination
Receiver
- Circuit Type: Dual conversion superheterodyne
- Intermediate Frequencies: 1st IF = 21.4MHz , 2nd IF = 450kHz
- Maximum useable sensitivity: -123dBm for 12dB SINAD
- Audio output power: 2 Watts at 8 ohm load
- RX Audio de-emphasis: -6dB/octave 300Hz to 3kHz
Mechanical
- Dimensions: 22.5 (d) x 100 (w) x 76 (h) mm
- Weight: 210g transceiver only