This 20A panel mount push button single pole circuit breaker uses a snap acting bimetal element to sense current overload. As the bimetal snaps through in response to an overload, it opens the electrical contacts and allows the reset button to pop out. The circuit remains disconnected until someone pushes the reset button, closing the contacts and re-energising the circuit. Designed for protection of industrial circuitry up to 250V AC or 50V DC voltages. Requires a 12mm mounting hole.18mm label plate.
Trip Time Information
100% - No trip
165% - Trip in 1hr.
200% - 4 to 30s
300% - 2.5 to 11s
400% - 1.6 to 7s
500% - 0.8 to 2.5s
600% - 0.6 to 1.7s
Reset Type: Manual
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Contact Life: 125V AC @ 150% of rated current, 500 cycles
Dielectric Strength: 1500V AC / 1 minute
Insulation Resistance: > 100MΩ
Max Internal Resistance: 0.010Ω
Derating Factor: x 1.00
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm (exc. terminals)
Note: All specifications at 25°C.