Increase your mobile coverage to dependable levels
The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your 4WD, Truck or Caravan.
Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.
The Cel-Fi Repeater has been tested, authorised and approved by Telstra for use with Telstra, Aldi Mobile, Boost Mobile, Woolworths Connect + other MVNO’s
Nextivity’s Cel-Fi GO is a cost-effective and intelligent indoor coverage solution operating on 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost indoor voice quality and increase data speeds for HSPA or LTE consumers. The Cel-fi GO differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users.
Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.
- Ups your data speed and saves your battery usage
- Made for vehicles, marine, caravan and transport applications
- Boost your signal by up to 100dB of system gain
- Kits available Include external and internal antennas
- Unit is Locked to your specific Mobile Network
- Carrier authorised and approved product
- 3G/4G Band Selection Button with status display
- Bluetooth WAVE App for iPhone, Android & PC
- 12Vdc accessories plug power for vehicles
- Continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi’s output power to suit.
- Only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
- Not interfering with the carrier’s network or other users on the network.
- Having a unique installation process to eliminate feedback into the mobile network.
- Available in pre pack combinations
Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). This and other functions are controllable by a bluetooth app to control your Cel-Fi GO. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
Features
– Designed for mobile applications
- 100dB of system gain
– Locked to Telstra’s Mobile Network
- Carrier approved
– Band Selection Button
– Bluetooth WAVE App for iPhone, Android & Computers
What is a Telstra Cel-Fi GO?
Cel-Fi GO is a type of inline repeater that picks up weak signal from an external antenna and rebroadcasts it at full strength from its service antenna. Cel-Fi GO models in this section are designed and approved for use on the Telstra mobile network.
The GO operates on Telstra’s main 3G, 4G, and soon 5G bands. For those in weak signal areas the main frequency band used is B28 700 MHz, which you might have heard called ‘Telstra 4GX’. This is a long range 4G service which has replaced the ageing Telstra 3G network.
For most of us the Cel-Fi GO will be automatically set to boost Telstra 700 MHz to provide a strong 5-bar mobile phone signal inside the car, boat, caravan, or building.
Telstra Cel-Fi GO is an inline repeater, which means it sits in between the external (donor) antenna and internal (service) antenna and has the sole job of amplifying the signal power. This makes it very simple and easy to install. It’s also one tough nugget, it’s built with a solid cast aluminium chassis and is IP54-rated so it can handle moisture and dust.
Cel-Fi GO G31 is single band, meaning it can rebroadcast one Telstra channel at a time. For most of us this just means choosing between 3G or 4G, but for more advanced building installations this means the technician may measure and select between a few frequencies to provide the best possible service.