UHF radio powered by digital signal processing for Pure Sound
The TX3520S displays the same rugged construction, comprehensive feature set and reliability as the TX3510S but with a remote head for vehicles with limited cabin space. Now equipped with ScanSuite, the TX3520S also enables uninterrupted communications with a group of like radios.
The shallow remote head allows access to the controls and a view of the LCD with the base unit mounted out of sight. The microphone can attach to either the front of the remote head or rear of the base unit for obstruction-free use ensuring years of reliable communications.
Australian made GME radios now have a 5 year warranty.
Product Details
- Shallow remote head with user controls
- ScanSuite
- Advanced signal management
- Digital signal processing
- Dynamic Volume Control
- Full spectrum backlighting
- Wide/narrowband receive filters
- Voice inversion scrambler
- CTCSS & DCS
- Selcall (5 Tone)
- Memory channel quick select
- Open and group scan mode
- Selectable priority channel
- Active channel transmit in scan
- Adjustable squelch control
- Rotary channel selector
- Rotary volume control
- Digital signal strength meter
- External speaker socket
- Front and rear microphone input
- Die-cast chassis
- Slide-in mounting cradle
In the Box:
- Mounting Cradle
- Microphone
- Microphone Clip
- DC Lead
- DC Lead
- Screw Pack
General
- Compliant Specification: Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
- Frequency Range TX : 476.425-477.4125 MHz
- Number of Channels: 80
- Channel Spacing: 12.5 kHz
- Operation Mode: Simplex or half Duplex with repeater talk around.
- Scanning Speed: 25 ms per channel (40 channels per second)
- Antenna Impedance: 50 Ohms nominal
- Nominal Battery Voltage: 12 volts DC
- Operating Voltage Range: 10-16 volts DC
- Battery Polarity: Negative Earth
- Standard Test Voltage: 13.8 volts DC
- Overvoltage Protection: 30 volts DC maximum. At 18 volts DC the channel display flashes ‘Hi DC’ for 5 seconds on receive. The RF power is reduced and TX flashes on transmit.
- Reverse Voltage Protection: Diode Crowbar
- Overcurrent Protection: In-line 2A Fuse
- Operating Temperature: -10°C to 60°C
Transmitter
- RF Output: 5 watts
- Spurious Emission: < - 70 dBc
- Frequency Error: < ± 1.5 kHz
- Modulation: FM
- Maximum Deviation: < ± 2.5 kHz at + 20 dB limiting
- Transmit Frequency Response: +6 dB per octave 300 Hz to 3 kHz +1-3 dB
- Demodulated Audio Signal to Noise: > 45 dB unweighted
- Current Consumption: 1.7 Amps with 50 Ohm termination
Receiver
- Intermediate Frequencies: 38.85 MHz, 450 kHz
- Sensitivity: - 123 dBm for 12 dB SINAD unweighted
- Selectivity: -6 dB at + 3.5 kHz -60 dB at ± 12.5 kHz
- Intermodulation Immunity: -72 dB
- Blocking Immunity: -98 dB
- Spurious Response Immunity: 70 dB
- Audio Output Power: 3 watts average into 4 Ohms
- Audio Signal to Noise: > 45 dB unweighted
- Current consumption: <175 mA muted 750 mA full volume
- Conducted Spurious Emission: <70 dBm
Mechanical Specifications
- Dimensions: 29 (H) x 128 (L) x 117 (D) mm
- Weight: 450 grams
- Antenna: SO239 panel socket
- External Speaker: 3.5 mm mono jack
- Microphone Port: 6 Way telephone style with rubber strain relief
Compatible Accessories
MB009 M/Bracket with rails, Fixed Mount Radios*
MB005 Mounting Bracket, Remote Head*
LE002 1.8m Replacement Lead, TX3400/3420
LE09 12V DC Lead, suits most GME fixed radios*
RM3520 Remote Head, suits TX3520
CA45R Gimbal Knob suits TX3400/TX3420 Remote Head
LE040 Mic Extension Cable, suits TX3440/3540
LE026 12V Lighter Lead, suits GME fixed radios*
LEM6P Microphone Extension Lead Modular
AD001 8 Pin to 8 Pin Adaptor for LE040
AD008 8 pin Adaptor Mic lead extension
CA001 Mounting Rail for MB6
CA002 Mounting Clamp for MB6 Bracket
SPK04 4 Ohm Extension Speaker Box
SPK07 Water Resistant Extension Speaker
SPK08 8 Ohm Extension Speaker
SPK09 4 Ohm Extension Speaker
SPK45B Water Resistant Extension Speaker BLK
AE4701 UHF Radome Antenna, WHITE 2.1dBi