This 8 Zone Alarm Panel features flexible 8 Zone control panel & 4G Cellular communicator. Supplied with 4G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
The Panel can use SMS to receive commands from a Smartphone. Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter. The application sends all the intended commands to the Panel by using SMS service. Application can send commands including: arm/disarm, programming, check system status, read alarm memory, receive alarm messages and operate AUX outputs all by SMS.
Fuses
2 Amp auto resetting / Siren output & Reset output.
500mA auto resetting / 12 volt auxiliary outputs.
200 mA auto resetting / Strobe output
General
Power Input: 20VDC Plug Pack (supplied)
Power Output: 13.8v DC @ 800mA
Quiescent Current Draw: 80mA with 1 keypad
Operating Voltage: Dual Voltage 20VDC or 17VAC
Rechargeable Battery: 12 volt 7.0 Amp/hour Sealed lead Acid
Battery Charging Current: 350mA maximum, current limited
Dynamic Battery Test: Backup battery is tested under load, hourly and on arming
Zone Outputs: 8 (D8XCEL4G) 2 x 24hr tamper inputs
End Of Line Resistor: Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
Maximum Keypads: 3 (Sold Separately).
Integrated Radio Options: Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
Serial Header: Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
Integrated Access Control: Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
Siren Output: On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
Strobe Output: 12v DC timed output. Maximum 2 x 1 Watt strobe lights
Reset Output: 12v DC timed output. Maximum 3 x 12 Volt piezo screamers
Equipment Power Input: 13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX Outputs: Multi-pin connectors provides outputs Aux1~4, Aux5~8
Box Dimensions (W x H x D): 235 x 300 x 90 mm (Plastic housing)