12V DC, 3 Amp switch mode plug pack supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. Dimensions: 49W x 85H x 41D mm.
Features
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point Input
Specifications
Input- Rated Input Voltage: 100-240V AC
- Operating Range: 90-264V AC
- Rated Input Frequency: 50/60Hz
- Variation Frequency: 50/60Hz +/- 3Hz
- Rated Input Current: 0.8A Max.
- Primary Current Protection: An adequate internal fuse on the AC input line is provided
- Power Consumption (no loading): 0.1W Max. (Input voltage 115V and 230V)
- Configuration: II Conductor
- AC Leakage Current: 0.25mA (Max) @ 240V AC input
- DC Output Voltage: 12V DC
- Minimum Load Current: 0.01A
- Rating Load Current: 3A
- Rating Output Power: 36W
- Line Regulation: The line regulation is less than ±5% while measuring at rated load and +/-10% of input voltage changing.
- Load Regulation: The load regulation for +12V is less than ±5%, at measured output load from 0% to 100% rated load
- Temperature: Operating: 0°C +40°C, Non-Operating: -20°C +80°C
- Humidity: Operating: 10%~90% (Non Condensing), Non-Operating: 10%~90% (Non Condensing)
- Barrel Length: 10mm
- Plug Tip Type: 5.5mm outer diameter and 2.1mm inside diameter
- Polarity: Positive centre
- Cable Length: 1.8m
- MEPS Efficiency Level: VI