HP-3-MDGW Power Out 25A Chassis Socket PA0774

Extra heavy duty connector as used in commercial lighting and audio applications. Power Out. SAA approved. 

When connecting to mains power this must be installed by a licensed electrician. To be installed in accordance to the latest issue of AS/NZ 3000 and by a licensed electrician as ruled in the state of installation.

General Characteristics
Number of contacts: 2 + PE
Termination: Screw or Solder Tab 3/16”
Flammability: UL94V-0
Environmental: Complies with EU RoHS 2 Directive 2011/65/EU

Electrical Characteristics
Rated Operating Voltage: 250VAC
Test Voltage AC RMS: 3200V
Current carrying capacity: 25A
Typical Contact Resistance: ≤3mΩ
Insulation Resistance (initial): ≥2GΩ
Insulation Resistance (after damp heat test): ≥1GΩ

Climatic Characteristics
Protection Class: IP20
Operating Temperature: -25°C to 75°C

Mechanical Characteristics
Chassis Connector: 12g
Cable Plug: 32g
Typical Cable retention force: 200N (Subject to cable material and O.D.)
Screw Terminals: 2.5mm2 (AWG14)

Materials
Connector Shell / Finish: PA66 GF30 / Black / Grey
Insulators: PA66 GF30
Cable Boot / Backshell: Santoprene / PBT
Cable Clamp (Chuck): P.O.M
Contact Plug - Material / Plating: Brass / Silver
Contact Chassis - Material / Plating: Phosphor Bronze / Silver